Paul J Kendzor Machinery Sales
Page Updated :   31 March, 2009

Powder Coating Line For Sale       

 

 

Sorry, This System Was Sold Today For It's Asking Price !  

We have a very similar system for sale  Contact Paul@kendzor.com For Details.

 

 

A nationwide manufacturer has decided to decommission an automated powder coating line located in their Scranton, Pennsylvania facility. 

Installed in 2000 at a cost of over 2.5 million dollars, this line has enjoyed the benefit of a strong preventative maintenance program with recent major upgrades in 2008. 

The line is under power, in excellent condition, and is available for your inspection with a 24 hour notice.

 

The owner has drastically reduced the asking price of this system and will be accepting bids until midnight, Eastern Standard Time April 2, 2009

 

The sale will be conducted as follows:

·        Bids will be accepted for the complete line.

·        Bids will also be accepted for the individual components as listed below.

·        In the event the total of the individual components exceeds the highest bid for the complete line, the owner will award the bids on the individual components.

The system can be purchased forty eight hours before the bid deadline with a deposit and letter of intent for the agreed upon price. Asking price has been reduced to $250,000 as the line sets at the owner’s facility, Scranton Pa.

 

 


POWDER COAT LINE HIGHLIGHTS                   

 

  • Pre-treatment 170’ long 7-stage stainless steel JR Greene high-pressure parts washer. Each stage is independent of each other and could be separated and reduced in number if necessary.
  • This line has a single pass straight line convection dry off oven, up graded in 2008
  • The cure oven is a straight line, single pass convection oven, up graded in 2008 with a new 2008 up graded IR section.
  • Approx. 1200' variable speed 4" Rapid I beam track conveyor with 2 drives, 2 lube systems and attached load bars.
  • Two Norton Excel 2000 powder application booths with power movers and air dryer.
  • 18 Nordson sure coat guns in booth #1 20 Nordson Sure Coat Automatic Guns in Booth #2 with I-Control.
  • Modular EV Room, with 2 roof top air conditioner units
  • Part opening is 32" wide by 132" high and designed for up to 30' long parts.
  • Five cartridge recovery modules included, four with attached rotary sieves, and 7 color hoppers.
  • This line is equipped with its own Waste Water Treatment Plant, designed to meet rigid environmental regulations. Included is a modular testing lab and office
  • Two PCP burn off ovens
 

 

 

 
 
  • J R Greene Seven Stage 304 SS split top parts washer with top mounted  Rapid 4" I beam conveyor.

 

  • Washer length 170'  drain boards for 30' long parts
  • Stage #1 Pickle, Ambient 31' long, 1275 Gal, 110 nozzles
  • Stage #2 Rinse,  Ambient 28' long, 890 Gal. 66 nozzles
  • Stage #3 Cleaner, Heated, 33'long 1850 Gal 176 nozzles.
  • Stage #4 Rinse,  Ambient, 25'5"long 890 Gal 66 nozzles.
  • Stage #5 Phosphate, Heated, 28'6" long 1850 Gal 176 nozzles.
  • Stage #6 Rinse, Ambient, 11' long, 890 Gal 66 nozzles.
  • Stage #7 Sealer Ambient, 15' long, 700 Gal 44 nozzles.
  • Washer drain boards can be extender or reduced as required.
  • Stages can be added or deleted to suit customers needs.
  • Click To View Washer Backside
 

 

  • Two Nordson Excel 2000 booths

  • EV room with 2 Make up air units & overhead door.

  • 18 Automatic Sure Coat powder guns booth #1

  • 20 Automatic Sure Coat guns with Nordson I control in booth #2

  • Part opening 32" Wide X 132" high.

  • Two manual touch up openings in each booth.

  • Four Nordson Sure Coat Manual guns.

  • Both booths have power movers.

  • Five color collection modules ( 4 with rotary sieves)

  • Seven color powder hoppers with powder pumps

  • Booth #1 has a Nordson Reciprocators

  • Booth #2  has stationary gun movers

  • Fire detection on both booths 

  • Click To View Inside Booth

  • Click To View Booth #1 Controls

  • Click To View Booth #2 Controls

  • Click To View Powder Hopper
 

 

 
  • Automated touch screen controls and filter cake press
  • Additional pictures and specifications are available on request.
  • This line is equipped with its own Waste Water Treatment Plant designed to meet rigid environmental regulations
  • Click To View Waste Water Treatment Pic #2
 

 

  • View from exit end of dry off oven

  • Multiple doors on oven end

  • Air curtains on ends of dry off.

  • Return conveyor shown to upper right of oven

  • The blue brackets on top of washer support return conveyor.

  • Dry off was updated in 2008

  • Click To View Dry Off Control Panel
 

 

  • View from exit end of bake / cure oven.

  • Air curtain on exit end of bake / cure oven.

  • Oven jogs out at entrance for IR section.

  • New IR installed last year at a cost of over $80,000.

  • IR section can be separated from bake / cure oven

  • Click To View Bake / Cure Oven Backside

 
 

 

  • Bake / cure oven and IR control panel.

  • The IR section is separate from the cure oven and was updated in the past year at a cost of over $85,000 

 

 
 
  • Rapid Caterpillar variable drive unit  1 of 2 drives
  • Second drive located near exit end of bake oven.
  • Floor layout will be posted shortly.
  • Line is configured in a straight line at this time.
  • Line can be reconfigured to box shape to reduce footprint.
  • Contact paul@kendzor.com for other floor layouts.
 

 

  •  Incline from load area into washer entrance.
  • System is designed for 30' long parts
 

 

  • Unload Area conveyor suspended from ceiling.
  • Movable platform for small part load or unload.
  • We have two optional air operated parts lifters available for this system  Click Here To View Line Loaders
  • One of two automatic chain lubrication systems.
  • Load bars are attached between trolleys to maximize line density .
  • Large quantity of racks, hooks, and fixtures.

 

  • Modular office and testing lab located at washer entrance.
  • All lab testing equipment included.  

 

  

 

 

 

This line has low hours and is in excellent condition.  

This line if purchased new today would be well over $3,000,000. 

This unit is priced to sell and is under power and available for inspection !

Financing is available as well as removal, transportation, modification, and installation in your facility.  Click Here For Rigging Details

             Click Here To View Existing Line Layout In PDF Format  

             Click Here To View A Modified Box Layout In PDF Format

 

Contact  

For Bid  Packages, Questions, And Additional Specifications Please Contact :

 

Contact Paul J Kendzor
Phone (570) 262-5713
Fax (570) 603-7438
Email Sales@Kendzor.com

 
Leasing & Financing

Most of the machinery on our site can be leased with the submission of a simple one-page  credit application .  We can usually receive financing approval up to $150,000 within a few hours.

Larger transactions ( $150,000 to $ 15,000,000 ) are subject to a full financial package review. ( i.e. two years tax returns and two years financial statements on your company )    

 Contact sales@kendzor.com for lease application. 

 

 

 

CLICK HERE TO VIEW OTHER  POWDER COAT SYSTEMS AND EQUIPMENT

 

 

Paul J Kendzor Machinery Sales

Pittston, Pa. 18640-3210

E-Mail  Sales@Kendzor.com

Phone (570) 262-5713

Fax   (570) 603-7438

 
Copyright © 1971  Paul J Kendzor Machinery Sales.  Pittston, Pa   All rights reserved.

                                   

 

website statistics