Paint & Powder Coating Equipment
Welcome To Our Paint & Powder Coat Equipment Page Featuring...............
New and used powder coat ovens, powder booths, and powder application equipment.
We offer a full range of services including powder coat consulting, design, and worldwide installation.
To find out more information on any of the items below cut paste and place the item # in our inquiry form
|
|
||
| With current access to over 18 fully automated used industrial finishing lines both liquid and powder, we can provide you with a complete New or Used Turnkey system to fit your needs. | ||
| PC 110592
|
10 FPM Powder Coat Line Consisting of:
|
|
| PC 15011
|
Powder Coat System
Original cost over $600,000 No Reasonable Offer Refused ! |
|
| PC 040801
|
Powder Coat Automated Line
|
|
| PC 110591
Pictures & details in a few days
|
6 to 8 fpm Powder Coating Line
|
|
| PC 04091
|
High Production Powder Coating System Consisting Of :
|
|
| PC 05021 |
20 FPM Automatic Powder Coating Line Nordson Versa
Excel 2000
|
|
| PC 070103
Awaiting Pictures |
0 To 15 FPM Powder Coat Automated Line
|
|
| PC 05071 | 1 To 6 FPM Automated Powder
Coating Line
|
|
| PC 090612
Awaiting Pictures |
1 To 6 FPM 5 Stage Automated
Powder Coat System
|
|
| PC 101801
|
Complete Automated Conveyorized
Powder Coating System
|
|
| Air Make Up Units | ||
| PC 1160 |
( 1 ) Available at this time |
Trane 20 Ton AC/ Gas Heat and AC roof mounted self contained air makeup unit. Available Nov 2008 Unit has been removed and loading is included. |
| PC 9878 |
( 0 ) Available at this time |
New, Used, & Refurbished Air Compressors & Dryers For Sale. Contact Paul@kendzor.com for details. |
| Batch systems consist of an oven booth and gun. Our items are listed separately providing you with greater flexibility in choosing the equipment that fits your needs. Simply scroll down the page to find our ovens, guns and powder booths. We can also supply you with a complete turnkey batch system New or Used. Contact Paul@kendzor.com for details. | ||
| PC 04021
SOLD |
|
Powder Coat Batch System This complete system was purchased 2 years ago for an intended contract that was not released. It has very few hours use and is in excellent condition ! Filco oven 8' wide x 6'8" deep x 7'4" high, Deimco powder booth 6'wide x 8' high x 6' deep, Euroteck C85-D box feed gun with shaker. Very reasonably priced. |
| PC 03031 | Awaiting Pictures | Ace LP/ Natural Gas BurnOut Oven Model 4288 Purchased New in 2000, Inside dimensions : 72" x 72" x 110" High (330 cf) 900 degree primary, 1600 degree afterburner, weight 6,500 lbs., Programmable temperature control, Auto shut off, Roller cart and track, STD Water spray system, 16" ID Stack, 20" OD stack, 12 steel stackable racks 34" x 69" x 33" High, Insulated exhaust stack Unit is under power available immediately. |
| C 080216 | Awaiting Pictures | Pollution Control Burn Off Oven 5' Wide, 8' High 8' Long, water jet system, 2 burners with a total of 350,000 btu, One set up with propane & the other with natural gas. |
| PC 081901 |
|
Ace Burn Off Oven 4' x'4' .... Natural Gas 50,000 btu min 800,000 btu max. |
| PC 04091B |
|
Controlled Paralysis Burn Off Oven .... This oven is pictured in system # PC 04091 and is available separate from the system. You can view a picture of it included in the listing here. Picture |
| PC 110500 | * | (0) Available at this time |
| PC 161605 | SOLD | Richards-Wilcox Enclosed Track Conveyor Variable speed drive 2- 14 fpm, Chain Lubricator, Take up, Approx 275' total length, 2 inclines and 2 declines, Numerous left and right turns, 110' of new chain. |
| PC 09062 | * | 13 Stage Dual Tank Monorail E-Coat Line 7 fpm, Cathodic Epoxy, Product Size: 24" wide x 40" high x 72" long Product through-put 20 million sq. ft. per shift / per line. Floor Space Requirement: 35' wide x 140' long, 20' high. Can be used as two independent or same color. Additional details on request. |
| PC 09063 | * | 16 Stage Dual color / Dual Drop TTX Index E-Coat System Contact Paul@kendzor.com for details. |
| ** ***** | * | Other E-Coat Systems available but not yet listed. Contact Paul@kendzor.com for details |
| PC 110586 |
|
We have two line loaders for sale. One is
freestanding, and the other is rail mounted similar to a bridge
crane.
This unit is completely air operated and can lift parts or racks weighing 200 lbs and place or remove them on your paint line with one person.. It is currently equipped with a suction cup fixture for loading and unloading cabinets on a powder coat line. This can easilly be replaced with a hook for loading racked parts increasing its lift capacity. PC110586 is the free standing unit. Contact Paul@kendzor.com for details |
| PC 110587 |
|
We have two line loaders for sale. One is freestanding, and the other is rail mounted similar to a bridge crane. This unit is completely air operated and can lift parts or racks weighing 200 lbs and place or remove them on your paint line with one person.. It is currently equipped with a suction cup fixture for loading and unloading cabinets on a powder coat line. This can easilly be replaced with a hook for loading racked parts increasing its lift capacity. PC110587 is the overhead rail mounted unit. Contact Paul@kendzor.com for details |
| PC 09061 | * | Wagner - Reclaim Cymod Powder Booth 18' 6" Wide, 10' 11" High, 24' 6" Long, Work Opening 2' to 3' Wide, 6' High. |
| PC 161601 | Awaiting Pictures | Binks Reclaim Powder Coating Booth 24" Wide x 36" High Part opening ( can be increased to 36" x 48" ) PLC "Soft Touch" controlled system, Automatic variable speed blower for accurate air flow control, IR / UV detectors, One quick change module (extra modules available) SS construction, 250 lb. hopper, Cyclone / sieve separator, Built in 1996, Low hours, Complete with manual and PLC wiring diagrams. |
| PC 130901 | 
|
Nordson NHC-4 Powder Coating Booth Part opening 30" x 30" Booth is7'8" Wide x 12'9" Long, Has openings for 2 Manual guns and 6 Automatic Guns ( Guns not included) Excellent condition. 5 hp, AC,TEFC,3450 RPM with v belt drive. Average Face Velocity 100 FPM through all openings in the booth, Cross draft velocity not exceeding 60 fpm. Excellent Condition ! |
| PC 161603 | Awaiting Pictures | Reclaim Systems Powder Reclaim Booth 29" Wide x 48" high Opening, ( Can be increased to 53" x 59") 3 Cartridge modules, (3) 120 lb Hoppers, SS construction, 2 automatic and 2 manual openings, Self contained controls, Cartridge back purge, 24' Overall length, Cyclone / Sieve for powder separation, Excellent condition. |
| PC 161602 | Awaiting Pictures | Command-Aire Reclaim Powder Booth 3' x 5' part opening, 4500 CFM, Removable Hopper, 2 automatic and 2 manual openings, Self contained controls, Excellent condition. |
| PC 080208 | Awaiting Pictures | New Cartridge Filter Booth 10' Wide x 7' High x 7' Deep , 16 Cartridges, Fan, Motor, Control Panel, Light Fixtures. |
| PC 080202 | 
|
Torit Donaldson Spray Booth -ECB-4 with four Collection modules each with 4500cfm and six cartridge filters. Work area 15' Wide x 7'6" High x 7.86' Deep NEMA control panel includes motor starters, timer, light switch, with on / off reverse pulse cleaning, photohelic gauge, 480 Volt 3 Phase, TFC 5 hp motors, Lights have tempered glass covers, noise muffler. |
| PC 080207 | Awaiting Pictures | New Pocket Filter Powder Booth 10' Wide x 7" High, x 7' Deep |
| PC 160201 | 
|
Nordson N808R Collection Module With Vibratory Sieve NPE-HXS Powder feed hopper, 8" Vibratory screener, level sensor, Used only during system start up. |
| PC 9878 |
( 0 ) Available at this time |
New, Used, & Refurbished Paint Shakers and Mixers For Sale. Contact Paul@kendzor.com for details. |
| PC 11192 | * | (0) Available at this time |
| PC 060701 |
( 24 ) Available |
Nordson 100 Plus automatic guns and controllers.. |
| PC 080283 | ( 1 ) Available | Nordson Versa II Controller, gun, cable, hose, pump & cart. |
| PC 080284 | ( 1 ) Available | Nordson Versa II Controller, gun, cable, & hose. |
| PC 110566 | ( 1 ) Available | Gema Box feed Powder Coating Gun Cart, controller, and gun |
| PC 060701 | ( 2 ) Available | Nordson 100 Plus Manual gun and Controller |
Red Line Industries We
are a full service Red Line distributor of new powder application
equipment and powder coat guns including:
|
||
| Parker Ionics Coming soon a
full line of Parker Ionics manual and automatic powder guns and
booths. Arriving Dec 2008
Check Out Our New Parker Ionics Line Of
Products |
||
| R 231308 | Thermwood PR-36 Paint Spraying Robot, Excellent Condition , Accepting Offers ! | |
| R 231309 | Thermwood Paintmiser Paint Spraying Robot, Lab Demo Unit, Accepting Offers ! | |
| PC 98107 | * | KECO Custom Built Flagpole Painter. A nice addition for contractor or someone looking for a sideline business. Pays for itself on the first job! |
| PC 161604 | Pictures Soon | Infratech Short Wave Electric Infrared In Line Oven 18" x 36" Part opening, ( can be increased to 24" x 36") 24' Overall Length, 4 Separately controlled zones, Built in 1996, Very little use, Extra quartz tubes and elements. Excellent condition. |
| PC 080209 | Awaiting Pictures | Despatch Electric Oven Model V-41 - 55" Wide x 68" Deep x 67" High, 240 volt 3 phase, 51kw heater, digital controller, panel floor with tracks, aluminized steel interior, horizontal airflow, process timer. |
| PC 080287 | Pictures Soon | Wisconsin Electric Oven 10' Wide x 6' High x 20' Long |
| PC 080257 |
Pictures Soon |
Wisconsin Oven Model 6/9/6.5-E8 Electric walk in oven Ser# 034319311, 480Volt 3 phase, 6' Wide X 6.5' High X 9' Deep, Circulated air, Excellent Condition, Aluminized steel interior, Digital controller. |
| PC 080275 |
Pictures Soon |
Despatch Electric Oven PWD3-14-1E- 650 Degree F, 54" Wide, 68" High, 68" Deep, Dialatrol controller, Panel floor, Light, Forced exhaust system, Purge timer, Aluminized steel interior, round chart recorder, T/C ports. |
| PC 080292 |
Pictures Soon |
Despatch Electric Oven PSC3-57-1E- 480 Volt 3 Phase, 136 KW, 174 Amp, 7' Wide, 6'9" High, 12' Deep, Recirculation Fan, 7,200 CFM 5 HP, Temperature control and recorder, Partflow pneumatic, Panel floor with tracks, Ready to load. |
| PC 080289 | Pictures Soon | Steelman Electric Oven 450 Degree F, 8.8 KW, 6' Wide x 7' High x 10' Long, Track floor, Built in 1996 |
| PC 080215 | Awaiting Pictures | Infratrol Gas Oven - ....5' Wide x 7.5' High x 30" Deep, 1.8 Million BTU Eclipse top mount burner, 4 years old, used approx 2 years, Open on both ends, Honeywell digital controls. Excellent condition. |
| PC 110581
SOLD |
Infratrol Flow Thru Gas Dry Off / Bake / Cure
Oven 9' wide x 10' high x 25'6" long . conveyor loops thru oven and exits on
right side towards front. part opening approx 24" Wide x
84" Long
Excellent Condition. 
Interior Pictures (3) |
|
| PC 080214 | Awaiting Pictures | Despatch Gas Oven - 8' Wide x 7'2" High x 23' 7" Long, 500 Degrees, 1.5 Million BTU Burner By Comtherm, Converted to Gas In 1996, Vertical Doors on Both Ends, Door Beam Is 17' 6" High. Disassembled and ready to ship. |
| PC 080210 | Awaiting Pictures | Grieve Gas Oven - 4' Wide, 5' High, 4' Long |
Check Out Our New Gas
Batch Oven Pricing 
|
||
| PC 051801 | Awaiting Pictures | Geo. Olcott Corp. Batch Washer 5' x 3' ID 16" Opening Height, Electric Heat, air blow off, 11 stack, Built 9/98, 480v, 75 amp, 3 hp pump, oil skimmer. |
| PC 10042 |
|
Cincinnati Industrial Machinery Belt type, gas, continuous feed Washer / Oven. |
| PC 051802 | Awaiting Pictures | 2 Stage Washer .... Maxton Burner, Allen Bradley 500 Controller, Gas Dry Off, steam heated tank, 12" mesh valve, (3) belt lane, All Stainless Steel, 45' long, opening size 8" x 12" Built 1998, (2) 30 hp pumps, 10' 8" wide, 12' 8" high |
| PC 080205 | Awaiting Pictures | 3 Stage Washer 31' Long, Opening 28" x 56", Mild Steel, Renovated and in good working order. |
| PC 080206 | Awaiting Pictures | SBS 3 stage Washer and Combination Dry-Off / Cure Oven Product Opening 18" Wide X 36" High X 30" Wide. Purchased New In 1998 |
| PC 051803 | Awaiting Pictures | 5 Stage Belt Washer 36" Wide, steam heat, carbon steel, 40' long. |
Oven
Control | PCW 0411 |
1 Or 2 Wanted |
Used Nordson Versa-spray powder coat guns. |
|
Click Button Below For Our Current Listings
|
||
|
Leasing &
Financing
Most of the machinery on our site can be leased with the submission of a simple one-page credit application . We can usually receive financing approval up to $150,000 within a few hours. Larger transactions ( $150,000 to $ 15,000,000 ) are subject to a full financial package review. ( i.e. two years tax returns and two years financial statements on your company ) Contact sales@kendzor.com for lease application.
|
||
We Buy Sell And Market New And Used Paint, Powder Coat, And E-Coat Systems And Equipment.
If We Don't Have It We Will Help You Locate It !
Let us turn your surplus machinery or inventory into $$$
Kendzor Machinery Home Page
|
|
|
|
