Powder Coat Equipment For Sale

With current access to over 18 fully automated used industrial finishing lines both liquid and powder, we can provide you with a complete New or Used Turnkey system to fit your needs.

110594

Pictures And Details Will Be Available Soon

12 FPM Industrial Process Equipment Powder Coat Line Consisting of: Listed 2 April 09

6 Stage IPE Stainless Steel Washer 1 st and 3 rd stage heated
Part opening 36" wide by 90" high
Maximum Part Length 10' Hung On 6' Centers
Reverse Osmosis Water System With Three Stage Clarifier
Nordson Econo-Coat 6000 Powder Booth. With 8 Automatic Guns ( Other booths available for system)
Single Pass Dry Off Oven And Four Pass Bake / Cure Oven
850' 3" I beam Conveyor, Drive & Take Up
Washer Is 7 1/2' Wide x 13 1/2' High x 88' 2" Long 480v / 3PH / 60 HZ
Excellent condition and Available to load out.

PC 110592

10 FPM Powder Coat Line Consisting of:

3 stage Stainless Steel Insulated Washer 1 st stage heated
Part opening 39" wide by 72" high
Elevated combination dry off and bake cure. ( Oven can also be set on floor )
Advanced Powder Coatings Inc. Downdraft booth. ( Other booths available for system)
Richard Wilkox enclosed track conveyor with hooks 6" on center
3" & 4" I beam conveyor systems are also available as an option for this system
Excellent condition and Available to load out Dec 1, 2008

PC 110520

6 to 8 fpm Powder Coating Line We will sell these components separate from the system

Line Speed 6-8 fpm,
Part opening 2' x 4' x 6',
5 Stage mild steel washer with 3 heated stages
Wagner Cymod Automatic Booth, Reclaim systems spray to waste manual booth
8 Nordson Versa Spray Automatic Guns.
System was built by Advanced Curing Systems in 1993.
We have removed this system and it is currently in storage in Northeastern Pa.
This system is available for loading and installation as of Dec 1 2008

PC 15011

Powder Coat System

165' Tellkamp Bake Oven,
Burnoff Oven,
230' Oval Variable Speed Conveyor,
Opening 18" Wide, 96" High,
Nordson Booth, 12 Automatic Guns, 2 Manual Guns,
Pyro Clem Extinguishing System.

Original cost over $600,000 No Reasonable Offer Refused !

PC 04091

Details

High Production Powder Coating System Consisting Of :

Pre-treatment 63' multi-stage stainless steel high pressure parts washer.
Combination dry off and cure oven.
740' of variable speed conveyor system up to 18 feet per minute.
Onada auto powder gun control tower.
Automatic powder application reclaim powder booth.
Parts recognition system. Stops powder flow to guns if no parts are detected.
7 powder application guns, six automatic and one manual.
Built in powder sieve on each reclaim hopper.
Quick change rollaway powder collectors.
Programmable electro-mechanical reciprocators.
Air delivery system.
Waste treatment system

PC 040801

Powder Coat Automated Line

48" x 72" Part opening .New in 1998
Line speed 15 -20 fpm , 5 stage washer,
Nordson recovery booth with 4 modules,
14 automatic guns, 2 manual guns,
1500' overhead 3" I beam conveyor,
Combination bake dry off oven. SOLD (We have relocated this system)

PC 05071

1 To 6 FPM Automated Powder Coating Line

3 Stage Washer This washer was purchased New 2 years ago.
Nordson Reclaim Booth with Nordson Portable booth
300' of variable speed overhead conveyor 1- 6 FPM Line speed
28" x 84" Part Opening
Part Size: 24" wide 78" High 4' Long
This Is a Nice System Priced to sell !!
Booth Pictures
Washer Pictures Click Camera Icon's For Pictures
Oven Pictures

SOLD

30 Mar

PC 110593

5 To 10 FPM 7 Stage Automated Powder Coat System Price Drastically Reduced Click Here For Details

7 Stage J R Greene Pretreatment Washer 10' Wide x 18' High x 170' Long 1st & 3rd Heated
Profile Opening : 32" Wide x 132" High
Approx.2000' of variable speed 4" monorail X458 overhead conveyor
Two Nordson Excel 2000 powder booths 18 Sure Coat guns booth #1 20 Sure Coat guns booth #2, 4 Manual Guns
Nordson I - Control on booth #2
In line J R Greene dry off oven with air curtains
In Line J R Green bake oven with new IR Section
EV Room with 2 air make up units, windows, man doors, & overhead door
Waste water treatment plant with modular testing lab.
2 Pollution Control Products Burn Off Ovens
System is under power and available for inspection..
Sorry, This System Was Sold Today For It's Asking Price !

We have a very similar system for sale and will be listed soon

Contact Paul@kendzor.com For Details.

PC 101801

Complete Automated Conveyorized Powder Coating System

5 Stage energy saving automated wash system
Profile Opening : 30" Wide x 84"" High
460'' of variable speed overhead conveyor
Ultimate stainless powder booth with 4 recovery modules
20' x 40' Ransburg oven 2 Million BTU
Footprint 40' x 125'
Available Immediately
Under power

Click Camera Icon's For Pictures

Air Make Up Units

PC 1160

( 1 ) Available at this time

Trane 20 Ton AC/ Gas Heat and AC roof mounted self contained air makeup unit. Available Nov 2008 Unit has been removed and loading is included.

Air Compressors and Dryers

PC 9878

( 0 ) Available at this time

New, Used, & Refurbished Air Compressors & Dryers For Sale. Contact Paul@kendzor.com for details.

Manual Powder Coating Batch Systems

Batch systems consist of an oven booth and gun. Our items are listed separately providing you with greater flexibility in choosing the equipment that fits your needs. Simply scroll down the page to find our ovens, guns and powder booths. We can also supply you with a complete turnkey batch system New or Used. Contact Paul@kendzor.com for details.

PC 010601

SOLD

Listed 17 Feb

Powder Coat Batch System This system was purchased new 1 year ago and is in excellent condition! This system consists of::

Knox 7'6" Wide X 7'6" High X 10' Deep 500 Degree Double Door Natural Gas Oven
Nordson Vantage Box Feed Manual Powder Coat Gun and Cart
Hotsy 555SS Hot Water Manual Pressure Washer
Model 15S Vibratory Bowl Parts Finisher
Magnum 4436 Blast Cabinet With Reclaim Cyclone

We will sell this as a complete system or break down into individual components.. Priced to sell !!!!

Contact paul@kendzor.com for details.

PC 010602

Pictures And Details Will Be Available Soon

Listed 17 Feb

Powder Coat Manual Pocket Filter Booth Bleeker Brothers Manual Powder Coat Booth.Details:

93”High x 92”Wide x 122”Deep Open front with two 24"wide x 48" high conveyor part openings on sides
3 Hp 240/480 volt 3 phase Exhaust
16 Pocket Filters
6 Final Filters
Optional enclosed track conveyor and supports.

Disassembled and ready for loading. Excellent condition and priced to sell

Contact paul@kendzor.com for details.

PC 04021

SOLD

Powder Coat Batch System This complete system was purchased 2 years ago for an intended contract that was not released. It has very few hours use and is in excellent condition ! Filco oven 8' wide x 6'8" deep x 7'4" high, Deimco powder booth 6'wide x 8' high x 6' deep, Euroteck C85-D box feed gun with shaker. Very reasonably priced.

Burn Off Ovens

Front View Control View Back View Side View

PC 121904

Awaiting Pictures

Pollution Controls Burn Off Oven 60" Wide x 64" High X 72" Deep Natural Gas 300,000 BTU

PC 121903

Awaiting Pictures

S & S Burn Off Oven 58" Wide x 66" High X 72" Deep Natural Gas Good Condition

PC 180203

Click On Blue Links For Pictures

Pollution Control Products Burn Off Oven Model PTR 150 2155 Natural Gas 6' Wide, 7' High 8' Long, water jet system, 300,000 BTU

PC 121902

Awaiting Pictures

Bayco Burn Off Oven 2' x 2' x 4' .... Purchased 1998 Excellent Condition.

PC 04091B

Controlled Paralysis Burn Off Oven .... This oven is pictured in system # PC 04091 and is available separate from the system. You can view a picture of it included in the listing here. Picture

Chain On Edge Powder Coat Lines

PC 110500

Awaiting Details

(1) Available at this time

Conveyor

PC 110512

Rapid 3" I Beam Caterpillar Conveyor Drive

PC 110509

Richards-Wilcox Enclosed Track Conveyor Chain Lubricator. Adjustable Gravity Feed With Electric Solenoid

PC 110516

Richards-Wilcox Enclosed Track Conveyor Variable speed drive 6 to 8 fpm, Chain Lubricator, Take up, Approx 600' total length, 2 inclines and 2 declines, Numerous 90 degree turns,

E-Coat Paint Lines

PC 09062

13 Stage Dual Tank Monorail E-Coat Line 7 fpm, Cathodic Epoxy, Product Size: 24" wide x 40" high x 72" long Product through-put 20 million sq. ft. per shift / per line. Floor Space Requirement: 35' wide x 140' long, 20' high. Can be used as two independent or same color. Additional details on request.

PC 121910

Awaiting Pictures

4 FPM Cathodic Monorail E-Coat Line 18" x 48" Part Size Stainless Steel Washer Contact Paul@kendzor.com for details.

PC 09063

16 Stage Dual color / Dual Drop TTX Index E-Coat System Contact Paul@kendzor.com for details.

PC 121911

Awaiting Pictures

Cathodic Monorail E-Coat Line 4' Wide x 6' Deep X 8' Long Excellent Condition Contact Paul@kendzor.com for details.

** *****

Other E-Coat Systems available but not yet listed. Contact Paul@kendzor.com for details

Line Loading Equipment

PC 110586

We have two line loaders for sale. One is freestanding, and the other is rail mounted similar to a bridge crane.

This unit is completely air operated and can lift parts or racks weighing 200 lbs and place or remove them on your paint line with one person..

It is currently equipped with a suction cup fixture for loading and unloading cabinets on a powder coat line. This can easilly be replaced with a hook for loading racked parts increasing its lift capacity.

PC110586 is the free standing unit.

Contact Paul@kendzor.com for details

PC 110587

We have two line loaders for sale. One is freestanding, and the other is rail mounted similar to a bridge crane.

This unit is completely air operated and can lift parts or racks weighing 200 lbs and place or remove them on your paint line with one person..

PC110587 is the overhead rail mounted unit.

Contact Paul@kendzor.com for details

Powder Booths

Booth End Booth Side Powder Hopper & Reclaim Module Gun Controls Auto Guns Gun Parts

PC 180201

Click On Blue Links For Pictures

Sames Reclaim Powder Coat Booth Stainless Steel Upper Housing 36" Wide x 52" High Work Opening Complete with one color module Powder hopper with sieve, 6 Nordson Versa Spray Automatic Guns With Controllers

PC 161601

Sold

Binks Reclaim Powder Coating Booth 24" Wide x 36" High Part opening ( can be increased to 36" x 48" ) PLC "Soft Touch" controlled system, Automatic variable speed blower for accurate air flow control, IR / UV detectors, One quick change module (extra modules available) SS construction, 250 lb. hopper, Cyclone / sieve separator, Built in 1996, Low hours, Complete with manual and PLC wiring diagrams.

PC 030201

Click On Blue Links For Pictures

Two Reclaim Systems Powder Coating Booths Part opening 30"wide x 42"high 1 Manual gun and 6 Automatic Guns per booth Booths are roll off line. Excellent condition.

Control End View Booth 1 Control End View Booth 2 Side View Booth Exit End View Automatic Gun View

PC 110520A

Click On Blue Links For Pictures

Wagner Cymod / Reclaim Systems Powder Coat Reclaim Booth 22" Wide x 60" high Opening, Cartridge module for spray to waste. Cyclone for quick color changes (3) 120 lb Hoppers, SS construction, 8 Nordson Versa Spray automatic guns. 2 manual openings, Self contained controls, Excellent condition. Part of an automated system but will sell separate.

Booth End View Picture Booth Side View Picture Automatic Guns

PC 121911

Awaiting Pictures

Nordson Excel 2002 Powder Booths 3' x 6' part opening, Fire Detection, Rotary sieves, 12 Automatic Nordson Versa ll guns and controllers, 1 Manual Nordson Versa ll gun. ( Two Booths are Available)

PC 110520B

Click On Blue Links For Pictures

Wagner / Reclaim Systems Powder Coat Booth 22" Wide x 60" high Opening, Cartridge module for spray to waste. This booth can be used as a single color recovery booth or as a spray to waste manual coating powder booth.

Booth End View Picture Booth Side View Picture

PC 121912

Awaiting Pictures

Gema Vortec Cyclone Powder Coat Booth 42"Wide x 72" High Part opening, 16 Automatic Guns, 2 Manual guns, touch screen controls, fire detection system

PC 121913

Awaiting Pictures

Gema Diamond Series Powder Coat Booth 42" Wide x 72" High Part opening, Cartridge collection system, 16 Automatic Guns, 2 Manual guns, touch screen controls, fire detection system

PC 010602

Pictures And Details Will Be Available 19 Feb

Listed 17 Feb

Powder Coat Manual Pocket Filter Booth Bleeker Brothers Manual Powder Coat Booth.Details:

93”High x 92”Wide x 122”Deep Open front with two 24"wide x 48" high conveyor part openings on sides
3 Hp 240/480 volt 3 phase Exhaust
16 Pocket Filters
6 Final Filters
Optional enclosed track conveyor and supports.

Disassembled and ready for loading. Excellent condition and priced to sell

Contact paul@kendzor.com for details.

PC 080208

Awaiting Pictures

New Cartridge Filter Powder Coat Booth 10' Wide x 7' High x 7' Deep , 16 Cartridges, Fan, Motor, Control Panel, Light Fixtures.

PC 080202

Pictures

Sold

Torit Donaldson Spray Booth -ECB-4 with four Collection modules each with 4500cfm and six cartridge filters. Work area 15' Wide x 7'6" High x 7.86' Deep NEMA control panel includes motor starters, timer, light switch, with on / off reverse pulse cleaning, photohelic gauge, 480 Volt 3 Phase, TFC 5 hp motors, Lights have tempered glass covers, noise muffler.

Powder Reclaim Modules Only

For Powder Reclaim Booth Packages Scroll Up To View Complete Automatic Booths

PC 160201

Nordson N808R Collection Module With Vibratory Sieve NPE-HXS Powder feed hopper, 8" Vibratory screener, level sensor, Used only during system start up.

Paint Shakers / Mixers

PC 9878

( 0 ) Available at this time

New, Used, & Refurbished Paint Shakers and Mixers For Sale. Contact Paul@kendzor.com for details.

Paint Pots And Pumps

Powder Coating Guns (Used Automatic)

PC 11192

(0) Available at this time

PC 110599

( 8 ) Available

Nordson Versa Spray automatic guns and controllers

PC 121922

( 12 ) Available

Nordson Versa Spray ll automatic guns and controllers

PC 121923

( 8 ) Available

Nordson Versa Spray ll automatic guns with Sure Coat Controllers

PC 060701

( 24 ) Available

Nordson 100 Plus automatic guns and controllers..

Powder Coat Guns ( Used Manual)

PC 010607

SOLD

Nordson Vantage Box Feed Manual Powder Coat Gun and Cart, 1 Year Old, Excellent Condition

PC 121932

( 1 ) Available

Nordson Sure Coat Manual Box Feed Gun Controller, gun, cable, hose, pump & cart.

PC 121933

( 2 ) Available

Nordson Sure Coat Manual Hopper Feed Gun Controller, gun, stainless steel hopper, cable, hose, pump & cart.

PC 121931

( 2 ) Available

Nordson Tribo II Controller, manual gun, cable, & hose.

PC 110566

( 1 ) Available

Gema Box feed Powder Coating Gun Cart, controller, and gun Sale Pending

PC 060701

( 2 ) Available

Nordson 100 Plus Manual gun and Controller

New Powder Coat Guns

Red Line Industries We are a full service Red Line distributor of new powder application equipment and powder coat guns including:

Manual Box Feed Guns
Manual Hopper Feed Guns
Two Gun Systems
Suitcase Powdercoating Guns
Hobbyist and casual coater Guns
Powder Coat Sieves
Powder Coat Sieves With Mini Cyclone
Check Out Our New Red Line Products

Parker Ionics Coming soon a full line of Parker Ionics manual and automatic powder guns and booths. Arriving Dec 2008

Check Out Our New Parker Ionics Line Of Products

Paint / Powder Coating Robots

R 231308

Thermwood PR-36 Paint Spraying Robot, Excellent Condition , Accepting Offers !

R 231309

Thermwood Paintmiser Paint Spraying Robot, Lab Demo Unit, Accepting Offers !

Flag Pole Painting Equipment

PC 98107

KECO Custom Built Flagpole Painter. A nice addition for contractor or someone looking for a sideline business. Pays for itself on the first job!

Powder Coating Ovens ( Electric )

Powder Coating Batch & Conveyor Ovens ( Gas )

PC 161604

Pictures Soon

Infratech Short Wave Electric Infrared In Line Oven 18" x 36" Part opening, ( can be increased to 24" x 36") 24' Overall Length, 4 Separately controlled zones, Built in 1996, Very little use, Extra quartz tubes and elements. Excellent condition.

PC 080292

Pictures Soon

Despatch Electric Oven PSC3-57-1E- 480 Volt 3 Phase, 136 KW, 174 Amp, 7' Wide, 6'9" High, 12' Deep, Recirculation Fan, 7,200 CFM 5 HP, Temperature control and recorder, Partflow pneumatic, Panel floor with tracks, Ready to load.

PC 080289

Pictures Soon

Steelman Electric Oven 450 Degree F, 8.8 KW, 6' Wide x 7' High x 10' Long, Track floor, Built in 1996

Gas Train Burner Control Side View

PC 121943

Awaiting Pictures

Jenson Natural Gas Batch Oven - ....10' Wide x 10 High x 12' Deep, Eclipse top mounted burner, Excellent condition.

PC 110581

SOLD

Oven Control

Infratrol Flow Thru Gas Dry Off / Bake / Cure Oven 9' wide x 10' high x 25'6" long . conveyor loops thru oven and exits on right side towards front. part opening approx 24" Wide x 84" Long Excellent Condition. Interior Pictures (3)

PC 121941

Awaiting Pictures

Despatch Gas Batch Oven - 8' Wide x 7' High x 18' Long, 500 Degrees, 1 Million BTU Burner

PC 121942

Awaiting Pictures

Despatch Gas Batch Oven - 8' Wide x 9' High x 18' Long, 1993

PC 121944

Awaiting Pictures

Natural Gas Batch Oven - 8' Wide x 8' High x 18' Long, 1.2 Million BTU Excellent Condition

PC 110522

Click On Blue Links For Pictures

Advanced Curing Systems Bake Oven - 9' Wide, 7' High, 23' Long Two pass elevated (2') bake oven. Air curtains, enclosed track conveyor. We can install doors on this oven to convert it into a batch oven.

PC 110521

Click On Blue Links For Pictures

SOLD

Advanced Curing Systems Bake / Dry Off Oven - 20'6"' Wide, 8' High, 29'6" Long Single pass dry off 3 pass bake . Air curtains, enclosed track conveyor. This oven is part of PC110520 Automated line listed above and can be purchased out of the package.

Oven Panels Oven Top End View Gas Train Burner Control

Check Out Our New Gas Batch Oven Pricing

Washer / Dry Off Oven