500 TPH Capacity Heavy Media Anthracite Coal Processing Facility  We will quote the removal and relocation of this plant or owner will consider a lease on existing DEP permitted property,  Available immediatly. Financing Available. 

Full details and specifications will be listed shortly   

For Sale  4.5 MW  Gas Fired  Modular Cogeneration Power Plant. Financing Available.       Click Here For Details     and pictures.   

Limestone Processing Facility For Sale

For Sale Limestone Processing Plant

Limestone Processing Plant For Sale / 5.5 TPH
Owner no longer requires this plant which was designed as a limestone facility. The raw limestone was 80#/CU FT, 11,000 lbs/hour product rate, initial moisture 10%, product 99%, 16 mesh, final moisture 2%. Electric current: 3 phase, 60 cycle, 460 volts. All of the following components are assembled and the plant is in running condition and available for inspection or demonstration.

Description

Raymond low side roller mill complete with 40 HP, 200 RPM motor v-belt drive, equipment number PC-1510, serial number 88009

Tube vibratory feeder, equipment number FH-1511

Mill feed bin with flange for connection to Meyer slide gate, below slide gate flange to bellows connection on vibratory feeder, equipment number FE-1511

C-E Raymond #7 Cyclone collector complete with converter head and relief outlet flange to mate up with gravity double flap valve for cyclone discharge, equipment number FH-1512, cyclone equipment number FC1510. Product discharge 11,000 lbs/hr

C-E Raymond #1836 H.E. System fan complete with V-belt drive and motor, equipment number GB-1510

C-E Raymond #5 package air heater equipped with Hauck #2 fuel oil ONLY. Burner rated at 2,300,000 BTU/HR. Include standard flame safety control panel, equipment number BC-1510

Combustion air fan, equipment number GS-1511

Secondary dust collector, 6,000 acfm @ 180 degrees Fahrenheit, 979 sq. ft of cloth, 13.3 CFM @100lb pulse required, 16 oz. Polyester bags long, Ultra Model BW-64-120-III

Dust collector discharge airlock is Meyer Roto-Flo 8, equipment number FH-1513.

Dust collector vent fan, Chicago Blower #17 SQI-9H Class 2, 6,000 acfm @ 10 S.P., 1,650 R.P.M. @ 180 degrees Fahrenheit, motor 25 hp-1800 rpm, #284 T Frame, T.E.F.C., 3/60/460 V, equipment number GB-1512

Product storage 10 ton bin (equipment number FE-1512), bin discharge flange to fit Meyer 12 x 12 slide gate (equipment number FH-1514). Bin to be located immediately below cyclone discharge and dust collector discharge.

System control panel consisting of the following:

a. Table 1A Raytrol freestanding cabinet

b. Standard six position panel for Mod 30 instruments D-FS-1372
c. Mod 30 recorder, Taylor P/N 1700J2214000
d. Mod portable configurator with literature
e. Chart paper
f. Table 2A equipment for roller mill differential pressure control. Omit equipment for variable speed feeder drive 4-20 MA. Output will go directly to vibratory feeder
g. Table 3 equipment for temperature control of a roller mill including all field devices
h. Two (2) Dwyer magnehelic pressure gauges to monitor cyclone inlet and outlet pressure.
i. Two (2) amp meters with CT's to monitor mill motor and fan motor current
j. Illuminated push buttons for the following start/stop operations:
1. Mill motor
2. System Fan Motor
3. Combustion air blower
4. Dust collector discharge airlock
5. Dust collector vent fan
6. Space for 4 push buttons for customer supplied equipment
k. One (1) ten position betalert annunciator with horn. The alarms will be noted as follows:
1. Feed bin high level
2. Feed bin low level
3. Product bin high level
4. Product bin low level
5. Spares for customer inputs

Power Plant Wanted

Manufacturing Plant Wanted

 Click On The Button  Below To View Our Current Listings